Moving it to this space made sense for a couple of reasons;
1) it's closer to the bathrooms and kitchen, and
2) it's closer to the drain pipe which is required for the pressure relieve valve water line, and the drain pan drain.
I ripped out the old AC return plenum box and built an elevated platform for the stubby WH to sit on. This will allow the drain lines to line up and will enable effective use of the space below for storage, be it just an open area or possibly drawers (TBD).
The original drain pipe for the laundry area was cut down so new PVC pipes and the Washer drain and supply line boxes could be installed.
The old drain pipe setup |
The new (and incomplete) drain pipe setup. |
The copper pipe will be cut and capped shortly |
The WH has two drain lines that have to be attached as well as one from the AC system located on the deck above. I'll install a T-fitting for the WH. The AC line will just drain straight down in to the pipe though from a higher level than is reflected in the picture above.
More to come.
No comments:
Post a Comment